三马致力于打造优质传动设备蜗轮蜗杆
Solution for copper worm wheel and worm gear
Dongguan Sanma Copper Worm Gear and Worm Manufacturing Co., Ltd. specializes in producing Copper Worm Gear and Worm Gear, Worm Gear and Worm Gear, Copper Worm Gear and Worm Gear.
One solution is to ensure assembly quality.
Some special tools can be purchased or made by oneself. When disassembling and installing reducer parts, hammer and other tools should be avoided as far as possible. When replacing gears, copper worm gears and worm gears, original parts and pairs should be selected as far as possible. When assembling output shaft, tolerance coordination should be paid attention to. Hollow shaft should be protected by anti-adhesive or red Dan oil. To prevent wear and rust or scale, it is difficult to remove during maintenance.
Solution two. Selection of lubricating oil.
The copper worm gear reducer generally selects 220# gear oil. For heavy load, frequent start-up and poor environment reducer, some lubricant additives can be selected to make the gear oil still adhere to the gear surface when the reducer stops running, forming a protective film to prevent heavy load, low speed, high torque and start-up between the metals. Direct contact. The additives contain sealing ring regulator and anti-leakage agent, which can keep the sealing ring soft and elastic and effectively reduce the leakage of lubricating oil.
Solution three. Selection of reducer installation.
In case of location, try not to use vertical installation as far as possible. Vertical installation, the amount of lubricating oil is much more than horizontal installation, easy to cause the reducer heating and oil leakage.
Dongguan Sanma Copper Worm Gear and Worm Manufacturing Co., Ltd. specializes in producing Copper Worm Gear and Worm Gear, Worm Gear and Worm Gear, Copper Worm Gear and Worm Gear.
One solution is to ensure assembly quality.
Some special tools can be purchased or made by oneself. When disassembling and installing reducer parts, hammer and other tools should be avoided as far as possible. When replacing gears, copper worm gears and worm gears, original parts and pairs should be selected as far as possible. When assembling output shaft, tolerance coordination should be paid attention to. Hollow shaft should be protected by anti-adhesive or red Dan oil. To prevent wear and rust or scale, it is difficult to remove during maintenance.
Solution two. Selection of lubricating oil.
The copper worm gear reducer generally selects 220# gear oil. For heavy load, frequent start-up and poor environment reducer, some lubricant additives can be selected to make the gear oil still adhere to the gear surface when the reducer stops running, forming a protective film to prevent heavy load, low speed, high torque and start-up between the metals. Direct contact. The additives contain sealing ring regulator and anti-leakage agent, which can keep the sealing ring soft and elastic and effectively reduce the leakage of lubricating oil.
Solution three. Selection of reducer installation.
In case of location, try not to use vertical installation as far as possible. Vertical installation, the amount of lubricating oil is much more than horizontal installation, easy to cause the reducer heating and oil leakage.
Next:
The role of lubricating oil in worm gear reducer Previous:
Common problems of copper worm and worm gear
News Center
Commend Products
Contact
Hotline
400-026-9834
