蜗轮_蜗杆_铜蜗轮

Location: Home > 新闻动态 > 行业新闻

Details
272018-07

How to develop the copper worm gear reducer? Copper worm gear reducer, as a kind of equipment that people must use now, is widely used in various fields, and has developed more important role in enterprises.
Details
272018-07

How to replace copper worm gear lubricating oil Lubricating oil is used in various types of machinery to reduce friction and protect machinery and processing parts of the liquid lubricant, mainly plays a lubrication
Details
122018-05

Common use of worm and worm gear For the use of plastic worm gears and worms are very common, we can see their use in the transmission equipment of common mechanical equipment, the principle is the use of internal gear ...
Details
122018-05

How to assemble worm gear and worm gear If the worm gear and worm assembly bearing hole is fixed, can first install the worm wheel, and then from the fixed worm bearing hole, rotation and worm gear meshing
Details
122018-05

Vertical shaft worm gear drive gearbox Our new vertical shaft worm gear drive gearbox! The gearbox uses a 30:1 ratio to reduce worm drive applications, requiring very slow, smooth rotation.
Details
122018-05

Various trial run of worm gear reducer No load trial run: the running time of positive and reverse operation at rated speed should not be less than 2H.Two. The load trial run is carried out at rated speed and rated negative cylinder....
Details
122018-05

Precautions for worm gear reducer before installation the machine should be cleaned before installation. And check whether there are bruises and dirt on the installation shaft, if all should be cleaned.
Details
122018-05

Common causes and solutions of worm gear reducer reducer heating and oil leakage. In order to improve efficiency, non-ferrous metals are generally used as worm gears in worm gear reducers, and harder steel is used for worm gears. Because it...
Details
122018-05

Design principle of worm wheel and worm Basic parameter modulus m, pressure angle, worm diameter coefficient q, lead angle, number of worm head, number of worm gear teeth, crown height coefficient (take 1) and crown clearance...
Details
122018-05

Conditions for use of worm drive self locking. The spiral angle of the worm is very small. The worm can only drive the worm wheel, but the worm wheel can not drive the worm to rotate. 2. the transmission ratio is lar...
Details
122018-05

Routine maintenance of 9 worm gear reducer Before starting the worm gear reducer, it is necessary to check whether the oil in the lubricating oil tank is sufficient and whether the valves are in the starting state. After confirming that...
Details
122018-05

Advantages of powder metallurgy gear worm wheel for automobile Powder metallurgy gears and powder metallurgy worm gears for automobiles can reduce costs because of the advantages of powder metallurgy technology, as follows